sales@scrair.co.uk Local rate call 0333 772 0601

Large air user sees the installation of three SCR Compressors..

August 2015 see’s the final stages of a project to install three large SCR Compressors. The customer, a large air user in Chesterfield, purchased three SCR compressors, two 180kW fixed speed machines and one 250kW variable speed compressor to meet his air demand. With the new compressor house finally finished it was time take off the roof (again!) and remove the ageing Atlas Copco GA200, so the final two SCR compressors could be dropped into place. One of the 180kW SCR machines has been maintaining the base load for the last  month and now it was time to position the final two compressors!

IMG_6358

Out it comes! The Atlas GA200 is removed…R.I.P!

IMG_6361

One of the new SCR compressors is hoisted up, ready to be positioned…

IMG_6367

Superb crane control! The removed section of roof didn’t give the crane driver much margin for error..He also had to rotate the compressor 180 Degrees….Rather him then me! It’s rare you get to see the underside of a compressor, and even the quality and the finish underneath lives upto the SCR reputation of Quality Without Cost.

IMG_6360

Down she comes! Not a scratch on it! Lovely job…

IMG_6363

Two down one to go! The Third compressor the 250kW VSD is hovering above ready to be lowered into place…

IMG_6373

Here it comes! Compcare’s project manager helps guide in the VSD machine into it’s final position…steady!

Watch this space to see the finished project, the site will serve as a great reference site for future customers and distributors. Quality Without Cost.

Sharing is caring...Share on FacebookTweet about this on TwitterShare on LinkedIn

nigel cook

This site uses cookies. Find out more about this site’s cookies.